Обсуждение и Настройка ASUS WL500хх и DLink DIR 320

[mlechniy]

Привет всем! Вчера прошился последней прошивкой - WIMAX заработал сразу. MPCS не запускался со строки в startup "mpcs -b -c /usr/local/etc &" Стал запускаться когда я оставил просто "mpcs".
Послле этого роутер перестал раздавать интернет (ш@ра работает - инета нет).
В итоге я поставил в настройках lan - dhcp - теперь роутер с непонятно каким ип!!!
Попытался его определить посмотрел ип сетевухи 169.254.23.39 - пропинговал от 169.254.23.0 до 255 не отвечает ни один кроме сетевухи (169.254.23.39)
P.S. в веб морду не входит.

[DANtes]

Сообщение от mlechniy

Привет всем! Вчера прошился последней прошивкой - WIMAX заработал сразу. MPCS не запускался со строки в startup "mpcs -b -c /usr/local/etc &" Стал запускаться когда я оставил просто "mpcs".
Послле этого роутер перестал раздавать интернет (ш@ра работает - инета нет).
В итоге я поставил в настройках lan - dhcp - теперь роутер с непонятно каким ип!!!
Попытался его определить посмотрел ип сетевухи 169.254.23.39 - пропинговал от 169.254.23.0 до 255 не отвечает ни один кроме сетевухи (169.254.23.39)
P.S. в веб морду не входит.

Ты сразу же наделал несколько ошибок:
1. В стартапе НИЧЕГО прописывать не нужно, все уже есть. Тем более ты не совсем правильно и записал запуск mpcs.
2. В LAN DHCP не выставляй ни в коем случае, если не желаешь сделать из роутера примитивный свитч.
Сейчас выход один- перешить заново. Но не делать ошибок, описанных выше.

[mlechniy]

Сообщение от DANtes

Ты сразу же наделал несколько ошибок:
1. В стартапе НИЧЕГО прописывать не нужно, все уже есть.
2. В LAN DHCP не выставляй ни в коем случае, если не желаешь сделать из роутера примитивный свитч.
Сейчас выход один- перешить заново. Но не делать ошибок, описанных выше.

Так теперь роутер новый покупать???? А ком портом нельзя хотябы в какой - нибудь рекавери мод перевести???

[DANtes]

Сообщение от mlechniy

Так теперь роутер новый покупать???? А ком портом нельзя хотябы в какой - нибудь рекавери мод перевести???

А слезы не дали тебе возможности дочитать до конца? Перешей заново и все!

[mlechniy]

А ип мне как узнать??

Все пошла прошивка огромное спасибо)))

[DANtes]

Сообщение от mlechniy

А ип мне как узнать??

Ты как его первый раз перешивал? Так и сейчас сделай, IP загрузчика у него всегда 192.168.0.1

[MousEq]

[quote]Фактически мне нужно взять инет из свича, для тюнера. [/qupte]
Виноват, запутал этой фразой.

Подключить его к свичу и прописать ему в настройках сетевого подключения те настройки что на скрине, будет ли на нем интернет без подключения к VPN ?

Нет.

Начнём сначала. Вот схема сети.

Настройки МОДЕМА WAN - MODE - ROUTING. ENCAPSULATON - ENET ENCAP
Multiplexing -LLC.
Настройкм модема LAN - DHCP включен. IP 192.168.140.11

Чего я хочу? Хочу чтоб DIR-320 выходил в инет, для mpcs.

[Atilla]

Теперь понятно, модем трогать нельзя, я дал скрин выше, настраивать нужно так как на скрине, еси будут вопросы, лучше в личку скинь асю свою.

народ , а подскажите можно ли в этой прошивке как нибудь вырубить NAT ?

[DANtes]

Сообщение от retop

народ , а подскажите можно ли в этой прошивке как нибудь вырубить NAT ?

Ответь, чем он тебе помешал, а я исходя из этого попытаюсь тебе помочь.

DANtes, будь добр, помоги пожалуйста настроить связку Dir 320 и ZTE 8710 people.net. Все перепробовал.

log
Jan 1 02:00:59 OpenWrt user.info sysinit: <<<< 3G interface found. Connect... >>>>
Jan 1 02:01:00 OpenWrt user.info sysinit: * usb_modeswitch: tool for controlling "flip flop" mode USB devices
Jan 1 02:01:00 OpenWrt user.info sysinit: * Version 0.9.7 (C) Josua Dietze 2009
Jan 1 02:01:00 OpenWrt user.info sysinit: * Works with libusb 0.1.12 and probably other versions
Jan 1 02:01:00 OpenWrt user.info sysinit: Looking for target devices ...
Jan 1 02:01:00 OpenWrt user.info sysinit: No devices in target mode or class found
Jan 1 02:01:00 OpenWrt user.info sysinit: Looking for default devices ...
Jan 1 02:01:00 OpenWrt user.info sysinit: No default device found. Is it connected? Bye!
Jan 1 02:01:02 OpenWrt daemon.info dnsmasq-dhcp[1031]: DHCPDISCOVER(br-lan) 00:22:15:53:05:57
Jan 1 02:01:02 OpenWrt daemon.info dnsmasq-dhcp[1031]: DHCPOFFER(br-lan) 192.168.1.130 00:22:15:53:05:57
Jan 1 02:01:02 OpenWrt daemon.info dnsmasq-dhcp[1031]: DHCPREQUEST(br-lan) 192.168.1.130 00:22:15:53:05:57
Jan 1 02:01:02 OpenWrt daemon.info dnsmasq-dhcp[1031]: DHCPACK(br-lan) 192.168.1.130 00:22:15:53:05:57
Jan 1 02:01:02 OpenWrt user.info kernel: usbcore: registered new interface driver cdc_acm
Jan 1 02:01:02 OpenWrt user.info kernel: cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
Jan 1 02:01:03 OpenWrt user.info kernel: usbcore: registered new interface driver usbserial
Jan 1 02:01:03 OpenWrt user.info kernel: USB Serial support registered for generic
Jan 1 02:01:03 OpenWrt user.info kernel: usbcore: registered new interface driver usbserial_generic
Jan 1 02:01:03 OpenWrt user.info kernel: usbserial: USB Serial Driver core
Jan 1 02:01:05 OpenWrt daemon.info dnsmasq-dhcp[1031]: DHCPINFORM(br-lan) 192.168.1.130 00:22:15:53:05:57
Jan 1 02:01:05 OpenWrt daemon.info dnsmasq-dhcp[1031]: DHCPACK(br-lan) 192.168.1.130 00:22:15:53:05:57
Jan 1 02:01:29 OpenWrt user.info sysinit: /usr/sbin/pppd: unrecognized option '/dev/ttyACM0'
Jan 1 02:01:29 OpenWrt daemon.err pppd[1115]: unrecognized option '/dev/ttyACM0'
Jan 1 02:01:29 OpenWrt user.info sysinit: pppd version 2.4.4
Jan 1 02:01:29 OpenWrt user.info sysinit: Usage: /usr/sbin/pppd [ options ], where options are:
Jan 1 02:01:29 OpenWrt user.info sysinit: <device> Communicate over the named device
Jan 1 02:01:29 OpenWrt user.info sysinit: <speed> Set the baud rate to <speed>
Jan 1 02:01:29 OpenWrt user.info sysinit: <loc>:<rem> Set the local and/or remote interface IP
Jan 1 02:01:29 OpenWrt user.info sysinit: addresses. Either one may be omitted.
Jan 1 02:01:29 OpenWrt user.info sysinit: asyncmap <n> Set the desired async map to hex <n>
Jan 1 02:01:29 OpenWrt user.info sysinit: auth Require authentication from peer
Jan 1 02:01:29 OpenWrt user.info sysinit: connect <p> Invoke shell command <p> to set up the serial line
Jan 1 02:01:29 OpenWrt user.info sysinit: crtscts Use hardware RTS/CTS flow control
Jan 1 02:01:29 OpenWrt user.info sysinit: defaultroute Add default route through interface
Jan 1 02:01:29 OpenWrt user.info sysinit: file <f> Take options from file <f>
Jan 1 02:01:29 OpenWrt user.info sysinit: mru <n> Set MRU value to <n> for negotiation
Jan 1 02:01:29 OpenWrt user.info sysinit: See pppd(8) for more options.
Jan 1 02:01:59 OpenWrt user.info sysinit: insmod: can't insert 'usbserial': File exists
Jan 1 02:01:59 OpenWrt user.info kernel: USB Serial support registered for pl2303
Jan 1 02:01:59 OpenWrt user.info kernel: usbcore: registered new interface driver pl2303
Jan 1 02:01:59 OpenWrt user.info kernel: pl2303: Prolific PL2303 USB to serial adaptor driver
Jan 1 02:02:00 OpenWrt user.info kernel: USB Serial support registered for FTDI USB Serial Device
Jan 1 02:02:00 OpenWrt user.info kernel: usbcore: registered new interface driver ftdi_sio
Jan 1 02:02:00 OpenWrt user.info kernel: ftdi_sio: v1.4.3:USB FTDI Serial Converters Driver
Jan 1 02:02:00 OpenWrt user.info kernel: Initializing USB Mass Storage driver...
Jan 1 02:02:00 OpenWrt user.info kernel: usbcore: registered new interface driver usb-storage
Jan 1 02:02:00 OpenWrt user.info kernel: USB Mass Storage support registered.
Jan 1 02:02:03 OpenWrt user.info sysinit: Starting igmpproxy in normal mode
Jan 1 02:02:03 OpenWrt user.err igmpproxy[1169]: There must be at least 2 Vif's where one is upstream.
Jan 1 02:02:08 OpenWrt user.info sysinit: ping: sendto: Network is unreachable
Jan 1 02:02:08 OpenWrt user.info sysinit: 3G-connection loss. Reconnect...
Jan 1 02:02:08 OpenWrt user.info sysinit: killall: pppd: no process killed
Jan 1 02:02:19 OpenWrt user.info sysinit: * usb_modeswitch: tool for controlling "flip flop" mode USB devices
Jan 1 02:02:19 OpenWrt user.info sysinit: * Version 0.9.7 (C) Josua Dietze 2009
Jan 1 02:02:19 OpenWrt user.info sysinit: * Works with libusb 0.1.12 and probably other versions
Jan 1 02:02:19 OpenWrt user.info sysinit: Looking for target devices ...
Jan 1 02:02:19 OpenWrt user.info sysinit: No devices in target mode or class found
Jan 1 02:02:19 OpenWrt user.info sysinit: Looking for default devices ...
Jan 1 02:02:19 OpenWrt user.info sysinit: No default device found. Is it connected? Bye!
Jan 1 02:02:21 OpenWrt user.info sysinit: insmod: can't insert 'cdc-acm': File exists
Jan 1 02:02:23 OpenWrt user.info sysinit: ping: sendto: Network is unreachable
Jan 1 02:02:38 OpenWrt user.info sysinit: ping: sendto: Network is unreachable

[DANtes]

/dev/ttyUSB0 !!!

[baronet]

Уважаемый DANtes! Настраиваю конфигурацию для шары. В файле mpcs.conf (строки #LogFile и следующей) в настройках моего шаринг сервера указаны другие данные. Надо ли их заменять или оставить без изменений? С остальным вроде разобрался. Кстати, огромное спасибо за очень удобную оболочку для роутера!

[baronet]

Может подскажет кто: какая скорость должна быть выставлена в Openbox при шаре через роутер? Аль по барабану?

[DANtes]

Сообщение от baronet

Может подскажет кто: какая скорость должна быть выставлена в Openbox при шаре через роутер? Аль по барабану?

Для своего ресивера (если шаришь через ком-порт) ничего в mpcs.conf не меняй вообще. В самом ресивере скорость порта 115200

[baronet]

А я , кроме этих строк поменял! Не можете выложить оригинал, я заменю?

[MousEq]

А что бы это могло значить, индикатор статуса мигает постоянно, периодичность 1 секунда. DIR-320 откатил на заводскую прошивку.
Роутер сам при этом работает.

[DANtes]

Оригинал:
[global]
Nice = -10
LogFile = /dev/null
ClientTimeout = 7
ClientMaxIdle = 99999

[serial]
Device = auto://tuner@/dev/ttyS0?delay=2&timeout=500

#Special for Opticum/Globo...:
#Device = hsic://tuner@/dev/ttyS0?delay=2&timeout=500

#Special for Evo700:
#Device = evo://tuner@/dev/ttyS0?delay=2&timeout=500

#Special for Euston/Eurosat...:
#Device = sssp://tuner@/dev/ttyS0

#Special for Golden InterStar:
#Device = gi://tuner@/dev/ttyS0?delay=2&timeout=500

#Special for GS7001...:
#Device = gs://tuner@/dev/ttyS0?timeout=500

#Special for sharing with usb-com adapter (pl2303/ftdi_sio). Change "auto" for your sat-tuner:
#Device = auto://tuner@/dev/ttyUSB0?delay=2&timeout=500

[monitor]
#MicroMon or other monitors for mpcs:
Port = 988
NoCrypt =127.0.0.1
NoCrypt = 1.0.0.0-255.255.255.255
AULow =120
MonLevel =4

Переключил в USB0. Ничего
log
Jan 1 00:00:13 OpenWrt user.warn kernel: diag: Detected 'D-Link DIR-320'
Jan 1 00:00:13 OpenWrt user.info kernel: b44: eth0: Link is up at 100 Mbps, full duplex.
Jan 1 00:00:13 OpenWrt user.info kernel: b44: eth0: Flow control is off for TX and off for RX.
Jan 1 00:00:13 OpenWrt user.info kernel: roboswitch: Probing device eth0: found a 5325! It's a 5350.
Jan 1 00:00:13 OpenWrt user.info kernel: b44: eth0: powering down PHY
Jan 1 00:00:13 OpenWrt user.info kernel: mini_fo: using base directory: /
Jan 1 00:00:13 OpenWrt user.info kernel: mini_fo: using storage directory: /jffs
Jan 1 00:00:16 OpenWrt user.info kernel: b44: eth0: Link is up at 100 Mbps, full duplex.
Jan 1 00:00:16 OpenWrt user.info kernel: b44: eth0: Flow control is off for TX and off for RX.
Jan 1 00:00:17 OpenWrt user.info kernel: device eth0.0 entered promiscuous mode
Jan 1 00:00:17 OpenWrt user.info kernel: device eth0 entered promiscuous mode
Jan 1 00:00:17 OpenWrt user.info kernel: br-lan: port 1(eth0.0) entering forwarding state
Jan 1 00:00:19 OpenWrt user.info kernel: HDLC line discipline: version $Revision: 4.8 $, maxframe=4096
Jan 1 00:00:19 OpenWrt user.info kernel: N_HDLC line discipline registered.
Jan 1 00:00:20 OpenWrt user.info kernel: cfg80211: Using static regulatory domain info
Jan 1 00:00:20 OpenWrt user.info kernel: cfg80211: Regulatory domain: US
Jan 1 00:00:20 OpenWrt user.info kernel: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jan 1 00:00:20 OpenWrt user.info kernel: (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
Jan 1 00:00:20 OpenWrt user.info kernel: (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
Jan 1 00:00:20 OpenWrt user.info kernel: (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
Jan 1 00:00:20 OpenWrt user.info kernel: (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
Jan 1 00:00:20 OpenWrt user.info kernel: (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
Jan 1 00:00:20 OpenWrt user.info kernel: (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
Jan 1 00:00:20 OpenWrt user.info kernel: cfg80211: Calling CRDA for country: US
Jan 1 00:00:22 OpenWrt user.info kernel: cfg80211: Regulatory domain changed to country: US
Jan 1 00:00:22 OpenWrt user.info kernel: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jan 1 00:00:22 OpenWrt user.info kernel: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
Jan 1 00:00:22 OpenWrt user.info kernel: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
Jan 1 00:00:22 OpenWrt user.info kernel: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan 1 00:00:22 OpenWrt user.info kernel: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan 1 00:00:22 OpenWrt user.info kernel: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan 1 00:00:22 OpenWrt user.info kernel: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
Jan 1 00:00:23 OpenWrt user.notice kernel: SCSI subsystem initialized
Jan 1 00:00:24 OpenWrt user.info kernel: usbcore: registered new interface driver usbfs
Jan 1 00:00:24 OpenWrt user.info kernel: usbcore: registered new interface driver hub
Jan 1 00:00:24 OpenWrt user.info kernel: usbcore: registered new device driver usb
Jan 1 00:00:25 OpenWrt user.info kernel: b43-phy0: Broadcom 5354 WLAN found (core revision 13)
Jan 1 00:00:25 OpenWrt user.debug kernel: phy0: Selected rate control algorithm 'minstrel'
Jan 1 00:00:25 OpenWrt user.info kernel: Registered led device: b43-phy0::tx
Jan 1 00:00:25 OpenWrt user.info kernel: Registered led device: b43-phy0::rx
Jan 1 00:00:25 OpenWrt user.info kernel: Registered led device: b43-phy0::radio
Jan 1 00:00:25 OpenWrt user.info kernel: Broadcom 43xx driver loaded [ Features: PL, Firmware-ID: FW13 ]
Jan 1 00:00:27 OpenWrt user.info kernel: PPP generic driver version 2.4.2
Jan 1 00:00:27 OpenWrt user.info kernel: tun: Universal TUN/TAP device driver, 1.6
Jan 1 00:00:27 OpenWrt user.info kernel: tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Jan 1 00:00:27 OpenWrt user.info kernel: PPP MPPE Compression module registered
Jan 1 00:00:28 OpenWrt user.info kernel: ip_tables: (C) 2000-2006 Netfilter Core Team
Jan 1 00:00:28 OpenWrt user.info kernel: NET: Registered protocol family 24
Jan 1 00:00:29 OpenWrt user.warn kernel: Driver 'sd' needs updating - please use bus_type methods
Jan 1 00:00:29 OpenWrt user.info kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Jan 1 00:00:29 OpenWrt user.warn kernel: nf_conntrack version 0.5.0 (512 buckets, 2048 max)
Jan 1 00:00:31 OpenWrt user.warn kernel: nf_conntrack_rtsp v0.6.21 loading
Jan 1 00:00:31 OpenWrt user.warn kernel: nf_nat_rtsp v0.6.21 loading
Jan 1 00:00:31 OpenWrt user.info kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Jan 1 00:00:31 OpenWrt user.info kernel: ohci_hcd ssb0:1: SSB OHCI Controller
Jan 1 00:00:31 OpenWrt user.info kernel: ohci_hcd ssb0:1: new USB bus registered, assigned bus number 1
Jan 1 00:00:31 OpenWrt user.info kernel: ohci_hcd ssb0:1: irq 6, io mem 0x18003000
Jan 1 00:00:31 OpenWrt user.info kernel: usb usb1: configuration #1 chosen from 1 choice
Jan 1 00:00:31 OpenWrt user.info kernel: hub 1-0:1.0: USB hub found
Jan 1 00:00:31 OpenWrt user.info kernel: hub 1-0:1.0: 2 ports detected
Jan 1 00:00:31 OpenWrt user.info kernel: ohci_hcd ssb0:1: SSB EHCI Controller
Jan 1 00:00:31 OpenWrt user.info kernel: ohci_hcd ssb0:1: new USB bus registered, assigned bus number 2
Jan 1 00:00:32 OpenWrt user.info kernel: ohci_hcd ssb0:1: irq 6, io mem 0x18003800
Jan 1 00:00:32 OpenWrt user.info kernel: ohci_hcd ssb0:1: USB 0.0 started, EHCI 1.00
Jan 1 00:00:32 OpenWrt user.info kernel: usb usb2: configuration #1 chosen from 1 choice
Jan 1 00:00:32 OpenWrt user.info kernel: hub 2-0:1.0: USB hub found
Jan 1 00:00:32 OpenWrt user.info kernel: hub 2-0:1.0: 2 ports detected
Jan 1 00:00:32 OpenWrt user.info kernel: usbcore: registered new interface driver usblp
Jan 1 00:00:32 OpenWrt user.err kernel: hub 2-0:1.0: unable to enumerate USB device on port 1
Jan 1 02:00:32 OpenWrt user.info kernel: usb 1-1: new full speed USB device using ohci_hcd and address 2
Jan 1 02:00:32 OpenWrt user.info kernel: usb 1-1: configuration #1 chosen from 1 choice
Jan 1 02:00:37 OpenWrt user.info kernel: b43 ssb0:3: firmware: requesting b43/ucode13.fw
Jan 1 02:00:37 OpenWrt user.info kernel: b43 ssb0:3: firmware: requesting b43/lp0initvals13.fw
Jan 1 02:00:37 OpenWrt user.info kernel: b43 ssb0:3: firmware: requesting b43/lp0bsinitvals13.fw
Jan 1 02:00:37 OpenWrt user.info kernel: b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
Jan 1 02:00:43 OpenWrt user.info kernel: device wlan0 entered promiscuous mode
Jan 1 02:00:43 OpenWrt user.info kernel: br-lan: port 2(wlan0) entering forwarding state
Jan 1 02:00:46 OpenWrt user.info kernel: device wlan0 left promiscuous mode
Jan 1 02:00:46 OpenWrt user.info kernel: br-lan: port 2(wlan0) entering disabled state
Jan 1 02:00:46 OpenWrt user.info kernel: device wlan0 entered promiscuous mode
Jan 1 02:00:46 OpenWrt user.info kernel: br-lan: port 2(wlan0) entering forwarding state
Jan 1 02:00:47 OpenWrt user.info sysinit: Loading defaults
Jan 1 02:00:48 OpenWrt user.info sysinit: Loading synflood protection
Jan 1 02:00:48 OpenWrt user.info sysinit: Adding custom chains
Jan 1 02:00:49 OpenWrt user.info sysinit: Loading zones
Jan 1 02:00:51 OpenWrt user.info sysinit: Loading forwarding
Jan 1 02:00:51 OpenWrt user.info sysinit: Loading redirects
Jan 1 02:00:51 OpenWrt user.info sysinit: Loading rules
Jan 1 02:00:51 OpenWrt user.info sysinit: Loading includes
Jan 1 02:00:51 OpenWrt user.info sysinit: Loading zone defaults
Jan 1 02:00:53 OpenWrt user.notice root: adding lan (br-lan) to firewall zone lan
Jan 1 02:00:53 OpenWrt cron.err crond[1015]: crond (busybox 1.14.4) started, log level 5
Jan 1 02:00:54 OpenWrt authpriv.info dropbear[1022]: Running in background
Jan 1 02:00:54 OpenWrt user.info sysinit: pppoe: ioctl(SIOCGIFHWADDR): No such device
Jan 1 02:00:54 OpenWrt daemon.err pppoe-relay[1033]: ioctl(SIOCGIFHWADDR): No such device
Jan 1 02:01:00 OpenWrt daemon.info dnsmasq[1120]: started, version 2.51 cachesize 150
Jan 1 02:01:00 OpenWrt daemon.info dnsmasq[1120]: compile time options: IPv6 GNU-getopt no-DBus no-I18N DHCP TFTP
Jan 1 02:01:00 OpenWrt daemon.info dnsmasq-dhcp[1120]: DHCP, IP range 192.168.1.100 -- 192.168.1.251, lease time 12h
Jan 1 02:01:00 OpenWrt daemon.info dnsmasq[1120]: using local addresses only for domain lan
Jan 1 02:01:00 OpenWrt daemon.warn dnsmasq[1120]: no servers found in /tmp/resolv.conf.auto, will retry
Jan 1 02:01:00 OpenWrt daemon.info dnsmasq[1120]: read /etc/hosts - 1 addresses
Jan 1 02:01:00 OpenWrt daemon.err dnsmasq-dhcp[1120]: failed to read /etc/ethers: No such file or directory
Jan 1 02:01:01 OpenWrt user.info sysinit: <<<< 3G interface found. Connect... >>>>
Jan 1 02:01:02 OpenWrt user.info sysinit: * usb_modeswitch: tool for controlling "flip flop" mode USB devices
Jan 1 02:01:02 OpenWrt user.info sysinit: * Version 0.9.7 (C) Josua Dietze 2009
Jan 1 02:01:02 OpenWrt user.info sysinit: * Works with libusb 0.1.12 and probably other versions
Jan 1 02:01:02 OpenWrt user.info sysinit: Looking for target devices ...
Jan 1 02:01:02 OpenWrt user.info sysinit: Found devices in target mode or class (1)
Jan 1 02:01:02 OpenWrt user.info sysinit: Looking for default devices ...
Jan 1 02:01:02 OpenWrt user.info sysinit: No default device found. Is it connected? Bye!
Jan 1 02:01:04 OpenWrt user.info kernel: usbcore: registered new interface driver cdc_acm
Jan 1 02:01:04 OpenWrt user.info kernel: cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
Jan 1 02:01:05 OpenWrt user.info kernel: usbcore: registered new interface driver usbserial
Jan 1 02:01:05 OpenWrt user.info kernel: USB Serial support registered for generic
Jan 1 02:01:05 OpenWrt user.info kernel: usbserial_generic 1-1:1.0: generic converter detected
Jan 1 02:01:05 OpenWrt user.info kernel: usb 1-1: generic converter now attached to ttyUSB0
Jan 1 02:01:05 OpenWrt user.info kernel: usbserial_generic 1-1:1.1: generic converter detected
Jan 1 02:01:05 OpenWrt user.info kernel: usb 1-1: generic converter now attached to ttyUSB1
Jan 1 02:01:05 OpenWrt user.info kernel: usbserial_generic 1-1:1.2: generic converter detected
Jan 1 02:01:05 OpenWrt user.info kernel: usb 1-1: generic converter now attached to ttyUSB2
Jan 1 02:01:05 OpenWrt user.info kernel: usbcore: registered new interface driver usbserial_generic
Jan 1 02:01:05 OpenWrt user.info kernel: usbserial: USB Serial Driver core
Jan 1 02:01:11 OpenWrt daemon.notice pppd[1237]: pppd 2.4.4 started by root, uid 0
Jan 1 02:01:12 OpenWrt local2.info chat[1270]: abort on (BUSY)
Jan 1 02:01:12 OpenWrt local2.info chat[1270]: abort on (NO CARRIER)
Jan 1 02:01:12 OpenWrt local2.info chat[1270]: abort on (ERROR)
Jan 1 02:01:12 OpenWrt local2.info chat[1270]: abort on (NO DIAL TONE)
Jan 1 02:01:12 OpenWrt local2.info chat[1270]: abort on (NO ANSWER)
Jan 1 02:01:12 OpenWrt local2.info chat[1270]: abort on (DELAYED)
Jan 1 02:01:12 OpenWrt local2.info chat[1270]: report (CONNECT)
Jan 1 02:01:12 OpenWrt local2.info chat[1270]: timeout set to 10 seconds
Jan 1 02:01:12 OpenWrt local2.info chat[1270]: send (AT^M)
Jan 1 02:01:12 OpenWrt local2.info chat[1270]: expect (OK)
Jan 1 02:01:12 OpenWrt local2.info chat[1270]: AT^M^M
Jan 1 02:01:12 OpenWrt local2.info chat[1270]: OK
Jan 1 02:01:12 OpenWrt local2.info chat[1270]: -- got it
Jan 1 02:01:12 OpenWrt local2.info chat[1270]: send (ATZ^M)
Jan 1 02:01:12 OpenWrt local2.info chat[1270]: timeout set to 30 seconds
Jan 1 02:01:12 OpenWrt local2.info chat[1270]: expect (OK)
Jan 1 02:01:12 OpenWrt local2.info chat[1270]: ^M
Jan 1 02:01:12 OpenWrt local2.info chat[1270]: ATZ^M^M
Jan 1 02:01:12 OpenWrt local2.info chat[1270]: OK
Jan 1 02:01:12 OpenWrt local2.info chat[1270]: -- got it
Jan 1 02:01:12 OpenWrt local2.info chat[1270]: send (ATDT#777^M)
Jan 1 02:01:12 OpenWrt local2.info chat[1270]: expect (CONNECT)
Jan 1 02:01:12 OpenWrt local2.info chat[1270]: ^M
Jan 1 02:01:13 OpenWrt local2.err chat[1270]: SIGHUP
Jan 1 02:01:13 OpenWrt local2.err chat[1270]: Can't restore terminal parameters: Input/output error
Jan 1 02:01:21 OpenWrt daemon.notice pppd[1310]: pppd 2.4.4 started by root, uid 0
Jan 1 02:01:21 OpenWrt daemon.notice pppd[1310]: Removed stale lock on ttyUSB0 (pid 1237)
Jan 1 02:01:22 OpenWrt local2.info chat[1314]: abort on (BUSY)
Jan 1 02:01:22 OpenWrt local2.info chat[1314]: abort on (NO CARRIER)
Jan 1 02:01:22 OpenWrt local2.info chat[1314]: abort on (ERROR)
Jan 1 02:01:22 OpenWrt local2.info chat[1314]: abort on (NO DIAL TONE)
Jan 1 02:01:22 OpenWrt local2.info chat[1314]: abort on (NO ANSWER)
Jan 1 02:01:22 OpenWrt local2.info chat[1314]: abort on (DELAYED)
Jan 1 02:01:22 OpenWrt local2.info chat[1314]: report (CONNECT)
Jan 1 02:01:22 OpenWrt local2.info chat[1314]: timeout set to 10 seconds
Jan 1 02:01:22 OpenWrt local2.info chat[1314]: send (AT^M)
Jan 1 02:01:22 OpenWrt local2.info chat[1314]: expect (OK)
Jan 1 02:01:25 OpenWrt local2.info chat[1314]: ~^?}#@!}!}#} }9}"}&} } } } }#}%B#}%}%}&S^@&^S}'}"}(}"c$~~^?}#@!}!}$} }9}"}&} } } } }
Jan 1 02:01:31 OpenWrt local2.info chat[1314]: #}%B#}%}%}&S^@&^S}'}"}(}".,~~^?}#@!}!}%} }9}"}&} } } } }#}%B#}%}%}&S^@&^S}'}"}(}"jw~~
Jan 1 02:01:32 OpenWrt local2.info chat[1314]: alarm
Jan 1 02:01:32 OpenWrt local2.info chat[1314]: Failed
Jan 1 02:01:32 OpenWrt daemon.err pppd[1310]: Connect script failed
Jan 1 02:01:41 OpenWrt user.info sysinit: insmod: can't insert 'usbserial': File exists
Jan 1 02:01:41 OpenWrt user.info kernel: USB Serial support registered for pl2303
Jan 1 02:01:41 OpenWrt user.info kernel: usbcore: registered new interface driver pl2303
Jan 1 02:01:41 OpenWrt user.info kernel: pl2303: Prolific PL2303 USB to serial adaptor driver
Jan 1 02:01:41 OpenWrt user.info kernel: USB Serial support registered for FTDI USB Serial Device
Jan 1 02:01:41 OpenWrt user.info kernel: usbcore: registered new interface driver ftdi_sio
Jan 1 02:01:41 OpenWrt user.info kernel: ftdi_sio: v1.4.3:USB FTDI Serial Converters Driver
Jan 1 02:01:42 OpenWrt user.info kernel: Initializing USB Mass Storage driver...
Jan 1 02:01:42 OpenWrt user.info kernel: usbcore: registered new interface driver usb-storage
Jan 1 02:01:42 OpenWrt user.info kernel: USB Mass Storage support registered.
Jan 1 02:01:44 OpenWrt user.info sysinit: Starting igmpproxy in normal mode
Jan 1 02:01:44 OpenWrt user.err igmpproxy[1361]: There must be at least 2 Vif's where one is upstream.
Jan 1 02:02:04 OpenWrt local2.info chat[1395]: abort on (BUSY)
Jan 1 02:02:04 OpenWrt local2.info chat[1395]: abort on (NO CARRIER)
Jan 1 02:02:04 OpenWrt local2.info chat[1395]: abort on (ERROR)
Jan 1 02:02:04 OpenWrt local2.info chat[1395]: abort on (NO DIAL TONE)
Jan 1 02:02:04 OpenWrt local2.info chat[1395]: abort on (NO ANSWER)
Jan 1 02:02:04 OpenWrt local2.info chat[1395]: abort on (DELAYED)
Jan 1 02:02:04 OpenWrt local2.info chat[1395]: report (CONNECT)
Jan 1 02:02:04 OpenWrt local2.info chat[1395]: timeout set to 10 seconds
Jan 1 02:02:04 OpenWrt local2.info chat[1395]: send (AT^M)
Jan 1 02:02:04 OpenWrt local2.info chat[1395]: expect (OK)
Jan 1 02:02:04 OpenWrt user.info sysinit: ping: sendto: Network is unreachable
Jan 1 02:02:10 OpenWrt local2.info chat[1395]: ~^?}#@!}!}!} }9}"}&} } } } }#}%B#}%}%}&^DU^Vs}'}"}(}"AQ~~^?}#@!}!}"} }9}"}&} } } } }
Jan 1 02:02:14 OpenWrt local2.info chat[1395]: alarm
Jan 1 02:02:14 OpenWrt local2.info chat[1395]: Failed
Jan 1 02:02:14 OpenWrt daemon.err pppd[1310]: Connect script failed
Jan 1 02:02:19 OpenWrt user.info sysinit: ping: sendto: Network is unreachable
Jan 1 02:02:21 OpenWrt daemon.info pppd[1310]: Terminating on signal 15
Jan 1 02:02:21 OpenWrt daemon.info pppd[1310]: Exit.
Jan 1 02:02:34 OpenWrt user.info sysinit: ping: sendto: Network is unreachable


Help! PLEASE!!!

[Rix2006]

Dantes, скажите можно настроить шаринг в такой связке: dir-320 + nokia 5320XM + openbox x730?
Помогите настроить эту связку (какая нужна прошивка, организация автозапуска mpcs и ее настройка, настройка мобильного телефона nokia 5320XM в качестве модема подключенного через usb порт на dir-320)? rix2006@mail.ru